The Applications of Fluke power quality analyzer

Thermal imagers are very popular today due to one simple reason which is their wide applicability. These imagers can be used at many different places and can prove to be very beneficial. In terms of introduction, the work of these imagers is to convert thermal energy in to color so that a scene or an object can be studied and understood. Over the years, many science fiction and action movies as well as documentaries have shown these imagers and that is most of the people are already familiar with them. Now these imagers are also used as fluke power quality analyzer because they can be very efficiently used for the analysis of many different things such as buildings.

For analysis purpose many different models are taken in use such as 435, 43B, harga, jual and much more. These thermal imagers are used for the purpose of inspection of homes and for auditing energy. This way the building can be analyzed for any kind of damage caused by moisture, or for heat loss as well as other flaws which can prove costly in the long run. The imagers that are used as power quality analyzer are a little different from the conventional imagers. The difference is that in contrast to conventional imagers, they don’t need to have large range of temperatures but in thermal sensitivity needs to be higher in them.

When the fluke power quality analyzer is used for mechanical and electrical inspection, it is very helpful in preventing any big damage to electrical as well as mechanical devices. This is because when these devices get damaged due to factors like overloading, extreme wear or faulty parts the analyzer can point it out very easily so that these damages can be rectified much in advance before they become elaborate. This way they save any device owner from big damages. For this work the imager needs to have high resolution and sensitivity. 

The Right Way to Carry out Calibration of pH Meter

PH meter are a very important measurement tool and seeks applications in a lot of different processes, like you can use it in your hydroponic system. However before you can balance your system you will need to calibrate it. Calibration of pH meter is very important else you will not get the correct reading. Therefore, you need to calibrate your pH meter almost every week. In the case of the meter not being calibrated, no matter for what work you are using your meter, it will surely go wrong. Such as in the case of a hydroponic system, an uncalibrated meter is sure to not only damage your plants but in extreme cases even kill them.

Therefore you need to know the basics of kalibrasi pH metercalibration. For the starters you will need calibration solutions which would be two in number. Basically a digital meter that requires just a single solution for calibration is generally not a very good meter. Therefore when you use two calibration solutions then the pH of them should be 7 and 4 respectively. Now the next thing that is required by you would be three big sized glasses or even three plastic containers would also work for you. These containers should be big enough that you can immerse your pH probe.

Out of three, one container is used for holding water so that you can rinse your pH probe for calibration. You will keep the pH 7 solution in the second container and the pH 4 solution in the third. Also you should check your meter for cracks salt, algae, or other impurities. If you find any impurity as such you can use a cotton swab to clean the probe. Once this whole setup is complete you can easily carry out the calibration process. This is a very important measurement tool but without calibration you cannot get the correct reading therefore you need to do the calibration perfectly. 

The Working principle of Fluke thermal imager

Thermal imaging imager is something that everyone has seen in their life in movies and documentary but is not aware of its real name that is thermal imaging imager. In movies you would have definitely seen the imagers that tell about the presence of humans or animals in dark by sensing their body heat. Actually, these imagers transform heat or thermal energy in to color or visible light so that a particular scenario or an object can be analyzed. In this process, the image that is derived is known as thermo gram and the analysis of this image is done through a process called as thermograph.

Basically many companies manufacture these thermal imaging imagers and fluke is one of the leading ones in its manufacturing. There are many variations or different models available such as TI400, TI32, TI300, TI125, 43B and many more. Now to understand which model would be the most suited one for you, you need to understand the working of the imager. As you would be already aware that all objects radiate some amount of thermal energy and the imager detects this energy with the help of a sensor called micro bolometer. Basically, this micro bolometer is found in all the models such as TI132 or TI125 and is actually an arrangement of pixels. These pixels are made using a lot of different kind of compounds and the most common ones are vanadium oxide and amorphous silicon.

When the thermal energy of an object is sensed by the fluke thermalimager, the material of the pixels gets heated and this leads to a change in the electrical resistance. Consequently, the resistance is measured and the value obtained is then converted in to a temperature value. Once the value has been obtained, then the next step is the generation of a thermo gram. Each temperature value is given a color or a shade and then accordingly the thermo gram is prepared. 

Tridinamika Successfully Achieved ISO 9001: 2008 Quality Management System

A new historical story for Tridinamika to continue realizing its dream as a center of instrument and measuring devices in Indonesia. After believed by many well-known brands in the world of measuring tools, Tridinamika is ready to be a company that is transformed every day to become better. We make every effort to make improvements in the internal section of Tridinamika. After approximately one year of preparation in the improvement of the quality management system accompanied by Sentra Transforma one ISO consultants in Indonesia, we do a lot of preparation to make improvements to achieve the quality management system standard.

After making various preparations, it was the time for Tridinamika to bring external ISO auditor. Tridinamika invite external ISO Auditor for SGS Indonesia. Both Auditor teams from SGS, Mr. Rizamarro and Mr. Arie Nugroho present to conduct an audit or examine the suitability of the system to the standardization of ISO 9001: 2008. The audit was quite exhausting both body and mind, since this is the point of the assessment team's hard work over the years.

The Auditor conducts an audit in several departments of Tridinamika, right at 17:00 P.M. The auditor teams represented by Mr. Rizamarro announce the results of the audit. "After conducting an audit of all departments today, we did not find any Major findings, thus Tridinamika is eligible to receive ISO 9001: 2008", said Chairman of the Auditors who inevitably greeted with thunderous applause from the management and leaders of the department also present in the meeting announcement.

With this, Tridinamika declared successful in achieving ISO 9001: 2008 for the category "Trading and Distribution Test and Measurement Product" at UKAS certification body which is on par with the various other world-class companies.

"We as a member of the management would like to thank you for the success that we achieve ISO 9001:2008, thanks to the outstanding teamwork. But this is all just the beginning, so our job is to maintain consistency and continue to improve and be better ", said Mrs. Krismawati, Management Representative of Tridinamika.

ISO certification is the first that will complement our commitment to continue to improve customer service.

We also would to say thank you to all parties that made this ISO Certified possible. Hopefully this will become a starting point for us to continually provide the best for our customers and stakeholders.

Article Source Link: http://www.news.tridinamika.com/3638/tridinamika-sukses-meraih-sertifikasi-iso-90012008-sistem-manajemen-mutu