Simple Methods to Calibrate a Thermometer and a PH Meter

How often do we use thermometers? How important it is to sanitize thermometers? Well, calibration is very essential and mandatory. Thermometers should be sanitized before the first time it is being used and also in between usage. Calibrating a thermometer is a very elemental process. There are two ways to calibrate a thermometer; which are listed below.

Ice-point technique: In this method you fill an insulated container with water and crushed ice. Ice is supplementary to attain a temperature of 32deg F. Allow the temperature to establish for around 4-5 minutes and then immerse the thermometer into the container to be calibrated to the appropriate length. To avoid any blunder the stem of the thermometer has to be kept isolated from the sides and the bottom of the container. This method usually allows the calibration to within 0.1deg F.

Boiling point technique: Fill a container with water to attain the rolling boil temperature. Plot the thermometer in the centre of the container and submerge it in water completely. In this process avoid touching it to the sides and the bottom of the container. Keep it immersed in the boiling water for around 30 seconds, until the dial stops movement. Keep it immersed in the water until the temperature reads 212deg F. This method usually allows calibration to within 1.0deg F.

A PH meter is usually used to measure the basic and the acidic implicit of any given solution. It is mostly utilized by laboratory technicians, biologists, technicians etc. It is the most on-target instrument available for the precise testing of PH levels.

Calibration of PH meter is a very simple process. You turn on the PH meter. After waiting for around 30 minutes for the set up to warm up, take the electrode out of the solution. Wash it lightly with distilled water, without wiping the electrode membrane. Immerse the electrode in a ph7 buffer and press the calibrate button. Wait for the pH icon to stop flashing and press the measure button. Rinse the electrode with distilled water again and press the measure button. Wait for the pH icon to stop flashing after which you can record the pH of the given sample. 

Spectrum Analyzer – Signal Amplitude and Frequency Checker

A spectrum analyzer is a device which displays both signal amplitude and signal frequency on a comparative scale. A final graph is made that shows frequency of signals on the horizontal axis, and amplitude visible over the vertical axis. Instruments designed for daily purpose show results as an oscilloscope however, the laboratory instruments provide high precision results.

A spectrum analyzer is used to find out if any wireless transmitter is working in a proper state or not. A standard has been setup for the wireless transmitters, these instruments are basically used to check the purity of emissions. A term “panoramic reception” is used to explain working of these devices. According to this term, a spectrum analyzer is connected as an interface between a wireless receiver and electromagnetic signals which are visualized over any personal computer.

With the advent of such analyzers, it has become easy to determine the frequencies of different networking devices including Wi-Fi or any other wireless router. These instruments are successfully used to determine bandwidth of a digital or analog signal hassle free. for more details about spectrum analyzer visits our official website here. 

Spectrum Analyzer – Signal Amplitude and Frequency Checker

A spectrum analyzer is a device which displays both signal amplitude and signal frequency on a comparative scale. A final graph is made that shows frequency of signals on the horizontal axis, and amplitude visible over the vertical axis. Instruments designed for daily purpose show results as an oscilloscope however, the laboratory instruments provide high precision results.

Fig:-  Agilent E4402B ESA-E Spectrum Analyzer, 100 Hz to 3.0 GHz

A spectrum analyzer is used to find out if any wireless transmitter is working in a proper state or not. A standard has been setup for the wireless transmitters, these instruments are basically used to check the purity of emissions. A term “panoramic reception” is used to explain working of these devices. According to this term, a spectrum analyzer is connected as an interface between a wireless receiver and electromagnetic signals which are visualized over any personal computer.

With the advent of such analyzers, it has become easy to determine the frequencies of different networking devices including Wi-Fi or any other wireless router. These instruments are successfully used to determine bandwidth of a digital or analog signal hassle free

For more details about Agilent Spectrum Analyzer visits our official website : www.tridinamika.com . 

Know direction of wind with Lutron Anemometers

The discovery of anemometer was first made by Leon Battista Alberti in 1450. It was only a mechanical anemometer however now technically advanced instruments are available. Anemometer is scientific equipment which is used to measure the force, speed and direction of the wind. Apart from weather forecasting, they can be also installed in the extreme and unapproachable areas such as mines, tunnels, ventilation systems and sometimes even the aerial navigation system. Lutron is a popular brand known for selling high quality anemometers used in many Meteorology and Geophysics Agencies.

                                               Anemometers are classified into two categories. Firstly, instruments which are used to measure wind's speed, and secondly those used to calculate precisely the wind's pressure. However, there is a connection between both wind pressure as well as wind speed, so many of these instruments are generally designed to calculate both the factors.

                                                

                                                                                         LM-8010, AM-4100G and YK-80 AM are three popular products manufactured by Lutron available globally in an affordable price range. They are built with ultrasonic technology and have no extra moving parts. This instrument provides a quick response and helps the users to see results with higher resolution and accuracy. 

Eid mubarak to all

Dear  My Friends
Eid mubarak to all.... Selamat Jdul Adha 1434 Hijriuyah

By :- www.tridinamika.com 

Use An Oscilloscope To Experience The Great Development In Electrical Engineering

Electrical engineering has undergone noticeable developments in the present times. There have been inventions of many devices which have revolutionized the way things are done. An oscilloscope is an illuminating example of such a development. It is an electronic device which is used for measuring the voltage of an electrical appliance against time. It is basically used to diagnose the working conditions of an electronic device. An oscilloscope gives a representation of one or more potential difference in a two-dimensional graph. The vertical axis shows the voltage while the horizontal axis shows the time. Some sophisticated oscilloscopes show two or more forms of waves.

There are different kinds of these devices which have found great applications in both household and industrial areas. An oscilloscope operates with batteries which are either rechargeable or regular. There are several reputed companies which offer these devices on sale at reasonable prices. The sale oscilloscope by different companies at reasonable prices makes it extremely cost effective for people. These devices can also be purchased at second hand rates. The second hand ones are an ideal choice if cost savings and good quality are desired. The use of an oscilloscope gives great benefits to people. The voltage readings can be noted and faults can be identified. This would ensure the safety of the appliances. These devices are thus a great development in the field of electrical engineering.

 If you have any query related to Oscilloscope then visits our website :- http://www.tridinamika.com/oscilloscope/tektronix/oscilloscope

Ultrasonic Flow Meter- Something Which Is Becoming Extremely Favorable For Industries

With the growth of different industries, there has been an increase in demand for a number of things. Different industries require different devices for carrying out their operations. A flow meter is one of the  devices which are required in industries. It is a device which measures the rate of flow of liquids and gases. A flow meter is of great importance to industries. It gives valuable flow data for enabling the management to take important decisions. It is extremely important for the industries to use a flow meter as it helps in taking operational cost decisions and budget planning. 

The ultrasonic flow meter is a great example of such a device which is used widely in industries. It is considered very favorable for the industries as it can emit ultrasonic signals through liquids and gases. This kind of a flow meter helps in the easy determination of the mass or volumetric flow of liquids and gases. The Kalibrasi Flow meter has also gained great popularity throughout the market. These devices possess a great degree of functionality and versatility. These devices enable industries to measure the rate of flow of any kind of liquid or gas. The time-sensitive operations of certain industries can benefit greatly from this kind of devices. Industries are sure to gain profits from the use of these devices.  For more details about Ultrasonic Flow Meter click here.

Lutron Anemometer- A Preferred Choice Of Many Establishments

Science has made it possible for many significant devices to emerge. These devices have proven to be a great boon for mankind. The anemometer is one such device which has found great application in the present times. These are devices which are used for measuring the velocity of wind. Many weather stations have started using these devices for detecting and measuring the speed of wind. These are highly sophisticated and functional devices which help in measuring the velocity and wind velocity. The Lutron anemometer has gained great popularity throughout the globe. They are built up a great position and reputation in the market. Owing to their high degree of versatility and functionality, many weather stations and other establishments prefer them.

An anemometer Lutron is found in various types. Lutron specializes in offering the hand held anemometer which has very impressive features. These devices are capable of providing perfect and accurate wind velocity readings. This anemometer makes use of sound waves along with the wind to get the readings. Many research engineers and industries have found it beneficial to use an anemometer. They are very cost effective devices and are easily available in the market. They can also be used by individuals like wind surfers and climbers for knowing the wind conditions. Thus, these devices are very impressive and unique to use. They are sure to give people and industries a great uplift.
For more details about Lutron anemometer click here.

Kyoritsu Clamp Meter- A Great Device To Be Used As An Electricity Tester

Life without electricity is something difficult to think about in today’s era. Electricity has become a vital part of people’s everyday life since it helps in running a number of devices. However there are a number of equipment which have been developed in the recent times in the field of electricity. A clamp meter is one of them which have proved highly useful in the present times. These are devices which help in measuring and testing the electric current passing through a power line without causing the circuits to break. These are voltmeters which have two clamps or probes at its head. A clamp meter helps in getting an accurate reading of the electric current in any type of electrical equipment. 

A digital clamp meter Kyoritsu is gaining great popularity in the recent times owing to the number of benefits which they offer. The digital version of these devices is  extremely convenient to use and gives more accurate readings than the analog ones. A Kyoritsu clamp meter has a low maintenance and longer life which make it worthy of extensive use. The market is flooded with different models of Kyoritsu devices. They offer a high degree of insulation also to the electronic devices. These electricity tester is available for both single and multiple purposes. It is for the buyers to decide what they wish to buy. The digital versions are priced quite reasonably which makes these devices highly competitive in the market. Thus a clamp meter is something of great utility and functionality in the present times for the users. 

Fluke Digital Multimeter- A Versatile Measuring And Testing Device

The number of electronic devices which people use today has greatly increased the electricity consumption. It is however important to keep a track of the electricity consumption. For this there are a number of devices available for people to use. Fluke digital multimeters is one such device which has effectively combined all the commonly used measurement functions into a portable unit. Fluke as a company as greatly brought about an innovation in the field of electricity. The multi-testers produced by the company can perform many testing and measurement functions for current, resistance, voltage, continuity and even temperature. The company also produces a multimeter capable of measuring frequency. 

The multimeters Fluke is very versatile as it is capable of finding faults and doing field service work. Durability, long lasting batteries and easy-to-use are a few multimeters Fluke features and benefits a large number of households and other establishments. Fluke produces a range of multimeters which increases the number of choices available for people. The features and benefits of these devices also vary greatly. It produces multimeters which allow people to set it beside an equipment while handling the leads in a risky location and record the important data. 

The company has also been producing digital multimeters for many years now. These devices have a great degree of accuracy and many sophisticated features. Fluke is therefore considered to be an ideal company for people when it comes to acquiring measuring and testing devices. The multimeters of the company are priced very reasonably which makes it very affordable for people to purchase them. 

Choose Kyoritsu Insulation Tester For Ensuring Safety Of Electronic Devices

People use a number of electronic devices in their everyday life. However it is extremely important to ensure the safety of these electronic devices by use of suitable equipment. An insulation tester is one such equipment which is widely used today. They are used basically to test the electrical circuits. These devices come with a wide range of voltages like 250V, 500V and 1000V. Kyoritsu insulation tester is something which has flooded the markets and has found great application owing to a large number of features and benefits offered by it. These insulation testers have a large analog monitor which gives a clear reading to the users.

Kyoritsu testers also offer a variety of voltage options. They come with at least three options of voltages. The top testers have a resistance up to 400 ohms and has an automatic discharge circuit incorporated. They are designed to provide greater energy efficiency by incorporating long lasting batteries. They have AA batteries which provide test leads with great accuracy. They are also available as a digital device which enable people to test connections. The Megger insulation tester is also a great device being used by many today.

The Megger tester has sophisticated features which ensure the safety of the electric circuit by giving accurate readings of the voltage. They come with features like big backlit display which enables people to undertake insulation testing in poorly lit areas. The auto off or auto hold feature of these testers is very helpful in saving the battery’s life span.

What Does the Megger Insulation Tester Do

Megger insulation tester measures the resistance but compared to the other models which are limited to Ohm and less than Gigohms, Megger thrives on high end values or scales of Gigohms, Megohms, Teraohm and even beyond those numbers. Measuring instruments are also assessed according to their capacity to accurately determine the amount of current through insulation at high output environment.

Flexibility :-

This flexibility is what sets the Megger insulation tester flexible apart from other brands. Because of its wide range of values, it can be used in every application. When it comes to choosing a brand, regardless of the budget, you have also to consider the purpose. If you want a device for long-term maintenance, you need something with very expansive scales. If the device is used for proof testing, range may not be as crucial. It’s important, however, that the user is an electrical contractor because there are requirements with the power source that demands experience and skill.

As to the models of the Measuring instruments in Indonesia, they generally depend on the preference of the user. There’s no right or wrong decision whether they choose digital over analog or automated because it’s not focused on the application but rather on the comfort level of the user.

Many Applications of the Spectrum Analyser

A spectrum analyser is a device that measures the amplitude or the strength of the radio, electrical and optical frequency. Obviously, the device is very sensitive and crucial in the laboratory setting that quantifies minute mechanical and technical data to determine performance. In fact, most people mistake the analyser from the oscilloscope because they have the same look.

Applications:-

In optical laboratory setting, a spectrum analyser can be used to gauge the amount of light beams produced by lasers and diodes. When applied to radio frequency, the device can also be used to calculate the ratio of the signal to noise, how frequent is the response as well as the distortion in the frequency. In telecommunications, the analyser can determine bandwidth or trace down the interference. When it comes to measuring electrical signals, the oscilloscope is the first device that comes to mind. But it’s limited to showing data on how the signal changes over time. In contrast, the spectrum analyser can also do that and more such as determining the bandwidth, the signal stability, the power capacity and the bandwidth.

You can purchase the analyser at any store selling measuring instrument. If you can’t afford to do so, you can outsource the task to measurement service companies. 

Choosing a Battery Tester: Digital or Load

Battery tester: digital or load? This is often the question foremost in the minds of vehicle repair shops. To begin with, both types serve the same purpose which is to quantify the battery’s capacity to deliver its rated output of amp. What happens is the user will enter the battery’s capacity which will depend on the label, after a few moments the tester will spit out the result whether the battery has passed or failed. This is the same principle with the insulation tester which measures resistance in the current flow.

Digital or load?

Digital test equipment is the more modern version, which means it is more flexible in terms of the data results compared to the older model. Some brands are even able to measure the temperature and integrate the data along with all the others. Digital are also faster which can be a huge factor when the customers are plenty in the vehicle repair shop. 

One disadvantage, however, is that it’s not as reliable when measuring low registers in the battery’s static voltage. The gadget will always prompt the user to retest the battery or recharge the device. This is where the load battery tester reigns supreme. It may be older but it can be more consistent with low static voltages. You can buy both batteries from any gauge store.

There is no question the digital testers are more convenient, portable and faster, but traditional load testers are still popular and give consistent testing results.

Speed. Accuracy. Reliability.

Tridinamika is authorized agent of Hioki Indonesia

A Multi meter is tools or equipment checking electricity that has often used by the experts electricity and exploration measurements electricity. One of the multi-meters best born from manufacturer from Japan "HIOKI".  Not long ago HIOKI launched its latest variants in the category multi-meter digital, is DT4200. This Dt4200 turned out to be very sophisticated because other functions primarily as digital multi meters, DT4200 has also in complete with the technology True PAPUA ORGANIZATION.

                                                                    There is very little difference with models - models pocket that was before him. For HIOKI series DT4200 is earmarked for some electrical work to laboratory work, so that, in its use DT4200 have the same function series on Wednesday but there is addition technology TRUE PAPUA organizations that make the work of this device to multi-functional.

          

                             In their own Tridinamika HIOKI type DT4200 is interested, boosting demand for products also is very high, it is one of the reasons Tridinamika appointed official agencies to HIOKI by from HIOKI. This is obviously because HIOKI really satisfactory and the guarantee its productive and very are good quality for our mosaic products. Even though it is now many rivals in the field measurement tools of multimeter."If you are looking for digital multi-meters in the suggest that selective before buying, especially in high accuracy the prediction can reach. Because it is most important factor dam measurements using digital multi meters. And if you want to see specification more you can access to this website Tridinamika in address www.tridinamika.com.

Fluke Instruments in the Indonesian Market

Every industry has a few companies that genuinely care about bringing its customers the best that anyone could offer. In this age of technology, achieving high standards and yet keeping the costs reasonable is a possible scenario and only dedicated companies venture to do it. Fluke is one such company that is definitely an electrician’s friend. The array of equipment manufactured by them such as multimeters, clamp meters, cable testers to name a few form indispensable parts of a tool kit of an efficient electrician. 

                                                               Availability of Fluke in Indonesia is now a possibility as many distributors have them in stock. While accuracy of the devices is of the prime importance, making sure that they are absolutely safe to work with is another major requirement of these devices. Since the users are going to be working with electric current, there is a high risk involved. Hence a lot of research and designing has gone into each of these devices to make sure they are a pass on both these counts. Finding a Fluke distributor in Indonesia is not really hard task .

A Quick Overview on Digital Clamp Meters

A clamp meter is basically a device which is used to measure the electric current flowing through a conductor or a circuit. This is not a new invention and has been helping electricians for quite a time. These are designed in such a way that the device can be clamped on to the conductor with the help of the jaws and take readings regarding the properties of the current. This makes it easier and safer to work as the conductors need not to be disconnected to take the readings. While analog clamp meters have been in use for a long time, the current market has some great products to offer.

                                             The digital clamp meter by Kyoritsu is a popular product that is highly efficient. Digital clamp meters are gaining popularity due the accuracy of the reading that it can provide. R&D into this field has also made them a lot safer and easier to use. Fluke clamp meters are also a great choice available in today’s market. The LCD display available on these devices makes it easier to take readings when compared to their analog counterparts. Even though they are built with all the safety concerns in mind, it is important that the user understands the proper way to use it. 

How Insulation testers test conductor insulation

Insulation testers are an indispensable tool in any electrician’s tool kit. What they are, are basically measuring instruments to check the thickness of insulation for a conductor. They can also indicate if there are any damaged areas that need to be looked at. Considering the dangers of electrocution, insulation testers play a great role in elimination of the risk.

 These instruments could also indicate if any areas need attention and hence making it such a useful piece of equipment. If there are any flaws in the design of a given electrical device, the insulation given to the device may breakdown resulting in leakage of current. This can prove to be highly dangerous to anyone who comes in contact with it and hence an insulation tester has a great importance. 

The test which is conducted to verify the efficiency of the insulation is known as the hipot (high potential) test. This test will verify whether the given electrical device is safe enough to be operated. The current market has great products to offer like the Megger insulation tester. These are designed after thorough research to ensure the accuracy and also the safety of the people who are going to use it.

PT. TRIDINAMIKA JAYA INSTRUMENT

Office Address :   

Jl. Boulevard Raya 
Blok BA.3 No.15 
Gading Serpong - Tangerang 15810
Indonesia


Fax:

021 - 546 7617

Phone: 

021-5467617/021-5467618
021-54212399/021-54212402


Email: 

tridi@tridinamika.com